Adam Audio A7V 7" Active Nearfield Studio Monitor  - Single Overview: A New Industry StandardThe A7V is a contemporary 2-way monitor that represents the evolution of ADAM Audio’s award winning A7X. It features a 7” Multi-Layer Mineral woofer and rotatable X-ART tweeter, which is made by hand in Berlin.DSP-based voicing, equalization and room correction options can be controlled remotely and in real time via the free-to-download A Control software, and updatable firmware allows for new filters and tunings to be implemented over the lifetime of the monitor.Features German Handmade Precision X-ART Tweeter with rotatable HPS waveguide 7'' Woofer (Multi-Layer Mineral) Cumulated Amp. Power Peak: 130 W Frequency Response @ -6 dB: 40 Hz - 45 kHz Max. peak SPL per speaker at 1 m: 105 dB SPL   A Control Remote SoftwareThe DSP-based functionality of all A Series monitors can be controlled remotely and in real time over ethernet using A Control.       Rotatable HPS Waveguide & X-ART TweeterMade from a new glass fiber polymer compound, the HPS waveguide enables the X-ART tweeter to disperse sound in space with controlled consistency.       Bass Reflex System, Cabinets and MountingThe new A Series cabinets build on the heritage of ADAM Audio and the AX Series in particular.               Automated Room Correction with SonarworksADAM Audio is proud to partner with Sonarworks on an automated room correction solution that runs directly on the DSP of A Series monitors.       Hybrid AmplificationThe A Series combines the best of both digital and analog worlds.               Multi-Layer Mineral Woofer [MLM]The latest materials and advanced analysis and design processes have led to the development of our new long-throw woofers.             VoicingsA “Voicing” is a pre-defined sound profile of an A Series monitor. On the back panel, you will find two different selections, “UNR” and “Pure”.             Room AdaptationOn the back panel of A Series speakers, you will find four bands of room adaptation equalization: Bass, Desk, Presence and Treble.         Digital Signal ProcessingThe A Series capitalizes on the transformative power of DSP-based electronics to provide greater tuning precision than analog-only speakers.       Specifications Audio Input Connectors Analog: XLR, RCA Input Impedance: 9 kOhm / 3.3 kOhm Max. Input Level: +19 dBu Amplification Woofer Amplifier Type: PWM Peak (10% THD, limiter deactivated): 110 W RMS (1% THD, limiter deactivated): 90 W Tweeter Amplifier Type: Class A/B Peak (10% THD, limiter deactivated): 20 W RMS (1% THD, limiter deactivated): 15 W Drivers Woofer Basket Diameter: 7″ Voice Coil Diameter: 1.3″ (33 mm) Cone Material: MLM Tweeter Type: X-ART Diaphragm Area: 4 inch² (2420 mm²) Equivalent Diaphragm Diameter: 2″ (56 mm) Velocity Transform Ratio: 4 to 1 Diaphragm Weight: 0.17 g Waveguide: HPS (rotatable) Waveguide Dispersion: 120° horizontal, 70° vertical Control Options [via Network] Networking Connector: RJ45 Connection Type: Ethernet Communication Protocol: OCA using standard IP data Control Software: A Control (Windows and MacOS available) Room Adaption Options: Backplate, Extended, Sonarworks SoundID Reference integration Advanced Room Adaptation: 6 x PEQ, Level, Delay Third-party Calibration Compatibility: Import from Sonarworks SoundID Reference Signal Processing AD converter: 24-bit Internal sample rate: 96 kHz Delay range, resolution: 0 – 10 ms, 0.1 ms Protection: Independent peak and thermo limiters for each driver, and amplifier thermo limiters Acoustics Frequency Response @ -3 dB: 44 Hz – 41 kHz Frequency Response @ -6 dB: 40 Hz – 45 kHz Max. peak SPL per speaker at 1 m (sine bursts): 105 dB SPL Max. peak SPL per speaker at 1 m (IEC-weighted noise): 113 dB SPL Crossover Frequencies: 2.8 kHz Control Options [via Backplate] Input Sensitivity: 0 dBu = 100 dB SPL at 1 m @ 0 dB level setting Level: -12 dB to +12 dB Input Selection: Balanced, unbalanced Voicings: Pure, UNR Room Adaption: Bass: +2, 0, -2, -4 dB Desk: 0, -2, -4 dB Presence: +1, 0, -1 dB Treble: +1.5, 0, -1.5 dB General Data Display: Front panel multi-colour LED Cabinet Design: Dual front ported Cabinet Material: Vinyl wrapped MDF and painted MDF front panel Mounting options: Threaded inserts on the bottom of the cabinet (4 x M8) Power consumption (max, idle, sleep): 220 W, 10 W, 3.5 W AC Input Voltage: 100 – 240 V, 50/60 Hz Power Rating: 300 W max. Operating Conditions:-10° C to +40° C (+14° F to +104° F); <75 % RH, non-condensing Weight: 8.7 kg (19 lb 3 oz) Dimensions (Height x Width x Depth): 337 mm x 200 mm x 280 mm (13 1/4″ x 7 7/8″ x 11″)

Read more less

Kali Audio LP-6 2nd Wave Lone Pine Series 6.5 Inch Active Studio Monitor - Single Unit The Kali Audio LP-6 2nd Wave is a next-generation 6.5-inch active studio monitor that delivers accurate and transparent sound. Designed for professional and home studios alike, it allows producers and engineers to make precise mix decisions with confidence. Key Features Upgraded 2nd Wave DSP tuning for enhanced clarity and improved transient response 3-D Imaging Waveguide provides a wide and precise stereo image Front-firing low-noise port minimizes bass distortion near walls Flat frequency response from 47Hz to 21kHz (±3 dB) Bi-amped Class D power with 40W LF and 40W HF (total 80W output) Maximum Sound Pressure Level (SPL) of 115 dB for dynamic audio performance Multiple input options including balanced XLR, TRS, and unbalanced RCA Boundary EQ settings to adapt to different room acoustics Specifications Woofer: 6.5 inch Tweeter: 1 inch soft dome Dimensions: 14.125 inches (H) x 8.75 inches (W) x 10.25 inches (D) Weight: 7.05 kilograms Input Sensitivity: +4 dBu (XLR/TRS), -10 dBV (RCA) Note: This listing includes one monitor. For stereo monitoring, two units are required. Ideal Applications Music production and mixing Professional and home studio setups Audio post-production and content creation

Read more less

PreSonus Eris E3.5 Active Studio Monitor Speakers (Pair) – Studio-Quality Sound for Every Setup Looking for professional-grade sound in a compact size? The PreSonus Eris E3.5 Active Studio Monitor Speakers deliver unmatched clarity and accuracy, making them ideal for music production, gaming, content creation, and home studios. Built with the same advanced technology as larger Eris models, these speakers offer true-to-life audio with precise frequency response. Why Choose the PreSonus Eris E3.5? 1. Studio-Quality Sound in a Compact Size Designed for professionals in tight spaces, the Eris E3.5 delivers balanced and detailed audio, ensuring you hear every nuance in your mixes or playback. 2. Kevlar Woofers for Cleaner Bass Custom-woven 3.5-inch Kevlar woofers reduce resonance and ensure smooth, tight bass with even sound dispersion and minimal distortion. 3. Smooth Highs & Wide Sweet Spot With 1-inch silk-dome tweeters, these monitors reproduce high frequencies with accuracy. Wide-dispersion technology expands the sweet spot for consistent audio across your space. 4. Onboard Acoustic Tuning High- and low-frequency tuning knobs allow you to tailor the sound to your room—perfect for treated or untreated environments. 5. Powerful Output with Zero Distortion Each speaker is powered by a 25-watt Class AB amplifier, delivering clean and loud output without sacrificing sound quality. 6. Versatile Connectivity ¼-inch TRS and RCA (rear-panel): Connect professional gear like interfaces and mixers. 1/8-inch stereo aux (front-panel): Plug in phones, tablets, or media players. Headphone Output: For quiet, private monitoring. 7. Expand Your Sound Pair with the PreSonus Temblor T8 active subwoofer for a full-range, yet space-efficient monitoring system. Perfect For: ✔️ Music Producers & Home Studios ✔️ Gamers & Content Creators ✔️ Video Editing & Multimedia Work ✔️ High-Fidelity Home Audio User Controls: High- and low-frequency acoustic tuning knobs Front-panel volume control for speakers and headphones Bluetooth pairing button (Eris E3.5 BT variant only) Power & Safety Features: 50W (25W/side), Class AB bi-amplification Soft start eliminates power-up popping RF interference, output current limiting, and over-temperature protection Internal power supply with IEC connector Power switch with LED indicator Inputs & Outputs: Bluetooth 5.0 (Eris E3.5 BT variant) Balanced ¼" TRS (2) Unbalanced RCA (2) Stereo 1/8" aux input Front-panel headphone output (1/8") Specifications: Performance: Frequency Response: 80 Hz – 20 kHz Crossover Frequency: 2.8 kHz Amplifier Power: 25W per speaker LF Driver: 3.5" Kevlar HF Driver: 1” silk dome Max SPL: 100 dB @ 1 meter Input Impedance: 10 kΩ Acoustic Controls: Midrange Control: -6 to +6 dB (center 100 Hz) High-Frequency Control: -6 to +6 dB (center 10 kHz) Volume: A-type taper Protection: RF interference Output current limiting Over-temperature Turn-on/off transient Subsonic filter External mains fuse Physical Details: Power: 100-120V ~50/60 Hz or 220-240V ~50/60 Hz Cabinet: Vinyl-laminated MDF Dimensions (W x D x H): 5.6" x 6.4" x 8.3" (141 x 162 x 210 mm) Weight (pair): 6.4 lbs (2.9 kg) Frequently Asked Questions (FAQ) Q1. Are these speakers good for professional music production? Yes, the Eris E3.5 offers accurate sound and onboard tuning, making them a solid choice for beginners and intermediate producers working in home studios. Q2. Is Bluetooth available on all Eris E3.5 models? No, Bluetooth is only available on the Eris E3.5 BT variant. Make sure to check the product title or description before purchasing. Q3. Can I connect these to my laptop or phone? Absolutely. You can use the 1/8" aux input on the front panel to connect phones, tablets, or laptops with a headphone jack. For wireless connection, choose the Bluetooth version. Q4. Do I need an audio interface to use these monitors? No, an audio interface is not required but is recommended for optimal performance. You can connect directly via RCA or aux input as well. Q5. Do these monitors come with speaker cables? Yes, the Eris E3.5 includes a speaker wire to connect the left and right monitors, as well as audio cables for standard connections. Q6. Can I use them for gaming? Yes! The detailed sound reproduction makes them excellent for immersive gaming and streaming setups. Q7. Is a subwoofer necessary? Not necessary, but if you need deeper low-end (especially for mixing bass-heavy tracks or cinematic work), pairing with the PreSonus Temblor T8 is recommended. --- Let me know if you want: - An **accordion-style collapsible FAQ** (using JavaScript or Shopify sections) - An **Add to Cart** CTA block - **Product comparison chart** (e.g., Eris E3.5 vs E4.5 vs JBL 104) I can also make this layout fully responsive or tailored for Shopify, WooCommerce, or HTML email campaigns.

Read more less

Audio-Technica ATH-M20X Headphones The ATH-M20x professional monitor headphones are a great introduction to the critically acclaimed M-Series line. Modern design and high-quality materials combine to deliver a comfortable listening experience with enhanced audio and effective isolation. An excellent choice for tracking and mixing. More About the M-Series Headphones Critically acclaimed M-Series professional monitor headphones deliver accurate audio and outstanding comfort, perfect for long sessions in the studio or on the go. Contoured earcups seal tight for excellent sound isolation with minimal bleed. Pro-grade materials are durable yet comfortable. Find out why online reviewers, top audio engineers, and cult followers agree—M-Series is an unmatched combination of audio quality and build that gets the job done. Hour after hour, year after year. Features Advanced build quality and engineering 40 mm drivers with rare earth magnets and copper-clad aluminum wire voice coils Tuned for enhanced low-frequency performance Circumaural design contours around the ears for excellent sound isolation in loud environments Convenient single-side cable exit Designed for studio tracking and mixing Specifications Type: Closed-back dynamic Driver Diameter: 40 mm Magnet: Neodymium Voice Coil: Copper-clad aluminum wire Frequency Response: 15 - 20,000 Hz Maximum Input Power: 700 mW at 1 kHz Sensitivity: 96 dB Impedance: 47 ohms Weight: 190 g (6.7 oz), without cable and connector Cable: 3.0 m (9.8'), straight, left-side exit Accessory Included: 6.3 mm (1/4") snap-on adapter Country of Origin: Taiwan

Read more less

Native Instruments Maschine MK3 MIDI Controller - Black Overview: BIGGER PADSBig, bold, and in your face, the larger pads create more room for complex moves like flams and rolls. New technological updates make the pads more sensitive to lighter touches, for more expressive playing. And since the center-to-center distance is exactly the same, your muscle memory and workflow don’t have to change. FULL COLOR, HI RES SCREENSWith two full-color displays and the four-directional push encoder, you can browse sounds, FXs, plug-ins, and instruments with a tactile, one-handed, completely visual workflow – simply find the thumbnail and load directly from the hardware. Plus, the high-res screens let you get more precise with your mixing, see an overview of your arrangement, or zoom in on waveforms to slice samples like a surgeon. STUDIO-GRADE AUDIO INTERFACEMASCHINE now comes with a studio-grade, 96kHz / 24-bit audio interface for pristine sound. Simply patch in a synth or add a dynamic mic for quick recording and sampling. Stereo line and MIDI ports make it a perfect centerpiece for any studio. Plus, it’s USB-powered, so you can record anywhere with your laptop. FASTER WORKFLOWThe new hardware layout cuts through the clutter to help you stay focused and get your ideas out fast. Instead of being hidden behind a shift-function button, some of the most-used features and functions can now be accessed directly with one touch. 8 TOUCH SENSITIVE KNOBSGo beyond tweaking with eight touch sensitive knobs. Touch once to activate special contextual menus, such as tag clouds, sound settings, and FX parameters. You can also map your most frequently used FX, instruments, or plug-in parameters to macros with the touch of a button. SMART STRIP FOR NEW WAYS TO PLAYThe Smart Strip opens up MASCHINE to whole new ways of playing. Use it like a keyboard wheel to pitch-bend and modulate sounds. Add new sonic textures, builds, or transitions with advanced performance FX like stutter and scratch. Or strum samples, synths, and drums like a guitar. Specifications: SYSTEM REQUIREMENTS macOS 12, 13, 14 (latest update) Windows 10 (64-bit, latest Service Pack) or Windows 11 (latest Service Pack) Intel Core i5 or equivalent CPU, or Apple Silicon (native mode or using Rosetta 2), 4 GB RAM (6 GB recommended) Additional Requirements USB 2.0 Port, 9 GB free disk space for MASCHINE software and MASCHINE Library, 33 GB free disk space for KOMPLETE SELECT. An Internet connection and a graphics card which supports OpenGL 2.1 or higher are required to download and activate MASCHINE software. Once installed and activated, all products can be used offline. ADDITIONAL INFO Supported Interfaces: Stand-alone, VST, VST3, Audio Units (64-bit), AAX 64, ASIO, CoreAudio, and WASAPI. MASCHINE requires activation: Activate using the serial number on the flyer inside the box. In case of graphics issues, please install the latest drivers for your GPU. This can be necessary even if Windows reports them as up to date. MASCHINE software, MASCHINE Factory Library, and KOMPLETE 14 SELECT are provided as downloads after registration — an Internet connection and a graphics card which supports OpenGL 2.1 or higher are required to download and activate the software. Once installed and activated, all products can be used offline. DIMENSIONS AND WEIGHT Width: 320 mm / 12.6", Length: 301 mm / 11.85", Height: 41 mm / 1.61", Weight: 2.2 kg / 4.85 lbs FEATURES AND SPECIFICATIONS Integrated hardware/software system includes sampler, arranger, mixer, sound library, FX, and more 8 GB MASCHINE library with samples, one-shots, sliced loops, sampled instruments, drums synths, presets, patterns, drum kits, and songs Includes 45 GB KOMPLETE 14 SELECT library 25 pro-quality studio and creative FX including filter, EQ, delay, reverb and compressor 2 high-resolution RGB color displays for precision sample slicing, sound tweaking, note editing, mixing, browsing, and more 16 large, ultra-sensitive pads make two-handed drumming easy Pro-grade, 96 kHz / 24-bit audio interface with 2 x ¼” TRS line outputs, 2 x ¼” TRS line inputs, ¼” dynamic mic input, stereo headphone output, 1 x MIDI In, 1 x MIDI out; 1 x Footswitch 8 touch sensitive knobs for parameter tweaking Smart Strip for strumming notes, pitch bending sounds, performing with FX, and more Four-directional push encoder for browsing, navigating, adjusting levels and balance Powered via USB 2.0 Seamless integration with KOMPLETE, NKS-ready instruments, MASCHINE Expansions, and the new KOMPLETE KONTROL S49/S61 Keyboards Classic groovebox features including 16 velocity levels, swing, pad link, note repeat, step sequencer, and vintage MPC 60/SP 1200 sampling emulation Compatible with all major DAWs (including Ableton Live, Logic Pro, Cubase, GarageBand, FL Studio, Avid Pro Tools, PreSonus Studio One, and more) as a VST, Audio Units, or AAX 32 and AAX 64 plug-in with full multi-core support AUDIO INTERFACE SPECIFICATIONS Line-In     Full Scale Level: +18,6 dBu Dynamic Range: 100 dB THD+N: 0.003 % Frequency Response: 20Hz-20kHz +/- 0.1 dB Crosstalk L/R: -96 dB Mic Input (max gain) Full Scale Level: -32 dBu Dynamic Range: 90 dB THD+N: 0.01 % Frequency Response: 20Hz-20kHz +/- 0.4 dB Mic Input (min gain) Full Scale Level: -3.4 dBu Dynamic Range: 102 dB THD+N:  0.004 % Frequency Response:  20Hz-20kHz +/- 0.15 dB Line Out Maximum Output Level: +18.0 dB Dynamic Range: 102 dB THD+N: 0.003 % Frequency Response: 20Hz-20kHz +/- 0.5 dB Crosstalk L/R: -100 dB Headphone Out Maximum Output Level: 29.4 mW @ 33 Ohm load Dynamic Range: 102 dB THD+N: 0.007 % Frequency Response: 20Hz-20kHz +/- 0.35 dB Crosstalk L/R: -60 dB

Read more less

Akai Professional MPC Live II Standalone Music Production Center With 7 Inch Touch Display Overview: Wherever Inspiration Strikes Meet MPC Live II — the full MPC experience in its most portable configuration yet. Everything you need to make music anywhere, right at your fingertips. The MPC Experience MPC Live II delivers the complete MPC experience without compromise. A rechargeable lithium-ion battery powers hours of music production anywhere. Full-size MPC pads offer the ultimate in drum performance, while expanded function buttons allow quick editing on-the-fly so you never miss a beat. Built-In Studio Monitors Studio-grade monitors are now built directly into the MPC Live II. These full-range stereo monitors deliver deep low end and crisp top end, making portable beat-making a true sonic experience. Get Connected MPC Live II integrates seamlessly into any creative space with USB 3.0, 2x2 MIDI, CV/Gate, stereo outputs, and more. Built-in WiFi and Bluetooth provide a fully wireless workflow. Super Performance MPC Live II supercharges your music production. With advanced performance tools like 16 Levels, Note Repeat, Auto Sample, and Chords & Notes mode, you'll take your creative potential to the next level. MPC2 Desktop Software Included The included MPC2 software offers tools for writing, recording, mixing, and mastering music. It includes plugins like Hype and Mellotron emulation, plus effects like AIR Vocal Suite and creative tools such as Half Speed and Stutter. Whether composing or finalizing your mix, MPC2 helps deliver a professional result. Specifications Pads 16 velocity and pressure-sensitive pads, RGB-backlit 8 banks accessible via Pad Bank buttons Knobs 4 x 360° touch-sensitive Q-Link knobs 4 Q-Link knob columns via Q-Link button 1 x 360° encoder for display navigation and selection Buttons 27 dedicated function buttons (red, amber, or green backlit) Display 6.9" (176 mm) diagonal full-color LED-backlit touchscreen Resolution: 5.9” x 3.7” (150 x 93 mm) CPU Quad-core ARM processor RAM 2 GB Storage 16 GB internal, expandable via SATA Connections 2 x 1/4” TRS inputs (1 stereo pair) 6 x 1/4” TRS outputs (3 stereo pairs) 1 x 1/4” stereo headphone output 2 x RCA inputs (1 stereo pair) 2 x 5-pin MIDI inputs 2 x 5-pin MIDI outputs 4 x TRS CV/Gate jacks (8 outputs total) 1 x Ethernet port 2 x USB Type-A ports 1 x USB Type-B port 1 x SD card slot 1 x Power adapter input Power Power adapter: 19 V 3.42 A (included) Battery: Up to 5 hours of use Dimensions (W x D x H) 16.2” x 9.6” x 1.8” 411.5 x 243.8 x 45.7 mm Weight: 3.38 kg

Read more less

Lewitt Ray Large Diaphragm Condenser Microphones Overview: The first microphone with AURA sensor. RAY is the first microphone to use AURA, our sensor-based technology*. It continuously measures your distance opening up groundbreaking possibilities for interacting with your microphone.  For perfectly balanced voice recordings. By continuously measuring your distance from the microphone, RAY can adapt your levels and tone on the fly. You can focus on your performance while creating flawless recordings for podcasts, content, live streaming, and music production. Experience this groundbreaking new way of recording by clicking the button below. Mute button. So simple, yet so useful. RAY is the first professional XLR microphone that comes with a MUTE button. You get clear visual feedback when MUTE is engaged and works fully analog, even when MUTE by Distance is activated. Perform better with Record-Ready sound. RAY features our signature Record-Ready sound. It's the first choice for producers and engineers working with artists like Justin Bieber, The Rolling Stones, Halsey, Post Malone, Kehlani, Yngwie Malmsteen, or Doja Cat, be it in the studio or on stage. High-end specifications ensure best sound quality. RAY is based on our best-selling studio microphone, the LCT 440 PURE, and therefore features high-end specifications. 1-inch true condenser studio capsule Cardioid polar pattern with effective rear rejection 8 dB(A) of self-noise Max SPL of 131 dBSPL Gold-plated 3-pin XLR connector 100% analog signal path A truly camera-friendly design. RAY's compact and clever design makes it easier to show your face to the camera, read a script, or view a screen while using the microphone. There is no bulky pop filter or microphone covering your face or field of view. The shock mount protects your signal from structure-borne noise. The pop filter protects your signal from plosives during vocal recordings and attaches to the shock mount magnetically. Works with every audio interface and mixer. RAY is a true condenser microphone with 3-pin XLR connector.  It powers all its features via 48V phantom power from your audio interface or mixer. No additional power source is needed.  Just plug it in and start recording. Features: Groundbreaking XLR microphone Sensor-based AURA Technology MUTE by Distance feature Dedicated MUTE button Record-Ready sound 1" true condenser capsule 100% analog signal path Works with any audio interface Camera-friendly design Specifications:Type: Condenser, externally polarized Acoustical operating principle: Pressure gradient transducer Diaphragm: 3 micron gold sputtered Mylar Transducer Ø: 25.4 mm, 1 in Polar pattern: Cardioid Frequency range: 20 ... 20,000 Hz Sensitivity: 22.6 mV/Pa, -32.9 dBV/Pa Self-noise: 8 dB (A) Max SPL: 131 dBSPL Signal / noise ratio: 86 dB (A) Dynamic range: 123 dB (A) Features: AURA, MUTE by distance, MUTE button, Lock mode AURA processing range: Seamless from 5 to 100 cm / 2 to 40 in MUTE by Distance range: 15 / 30 / 45 / 60 / 80 cm6 / 12 / 18 / 24 / 32 in MUTE attenuation value: -70 dB Supply voltage: 48 V ± 4 V Current consumption: 7.2 mA  Internal impedance: 120 Ω Connector: Gold plated 3-pin XLR Microphone enclosure: Zinc die cast Microphone dimensions: 138 x 52 x 36 mm, 5.43 x 2.04 x 1.42 in Microphone net weight: 330 g, 11.6 oz

Read more less

Lewitt LCT 441 FLEX Large-Diaphragm Condenser Microphone Multi-Polar Pattern version of the award-winning 440 PURE! 8 Polar Patterns with two reverse polar patterns too (for room capture) Top-tier capsule is taken from their flagship microphones Superior transient response and detail Ultra-high dynamic range and SPL capability Incredibly low self-noise   Your studio mic for full flexibility.The LCT 441 FLEX is a compact multi-pattern studio microphone. It features high-spec technology and eight different polar patterns. You'll be more flexible when it comes to recording different instruments or vocals. It also allows switching between high directivity or more room impression and provides freedom to experiment.   Pristine studio sound qualityCapture all the emotion of your performance.The 1" true condenser capsule of the LCT 441 FLEX captures your instruments or vocals with an impressive amount of depth and clarity. Every single one of our capsules is tested according to the highest quality standards. At LEWITT, we completely measure every single microphone before it gets to you. Only this way, we can be sure that you can make every detail of your sound count.   Let us introduce you to the LCT 441 FLEX, our puristic multi-pattern studio microphone. It follows the way paved by the highly acclaimed LCT 440 PURE, putting top-of-the-line technology in a compact housing. This 1″ true condenser microphone features eight types of directionality to choose from, including three reverse polar patterns that give you higher flexibility and invite to experiment. Comes with shock mount, windscreen, and pop filter.CHANGE YOUR SOUNDIn multiple waysA polar pattern affects how much room sound you end up recording. But switching your polar pattern not only changes the directivity but also alters the frequency response, resulting in a different sound coming from the same microphone. You can also control the proximity effect and have it pronounced or reduced according to your application. This can serve as another sound shaping tool.STAY FLEXIBLE – BE CREATIVERecord vocals and instrumentsUse the LCT 441 FLEX to record your vocals, acoustic instruments, guitar amplifiers, drums, percussion, and everything else. Do not hesitate to change your perspective by experimenting with different directivities. Its natural transient response and high dynamic range make sure that nothing will limit your performance on the technical side. Every session with the LCT 441 FLEX will result in vibrant and lively recordings.THE PROXIMITY EFFECTUnder your controlBy changing the polar pattern you are not only changing the frequency response of the LCT 441 FLEX. You can also control the proximity effect and have it pronounced or reduced according to your application.OUTSTANDING PERFORMANCENo technical boundariesWith a total of 8 polar patterns, low self-noise, and the ability to handle ear-shattering sound pressure levels, one thing is for sure – nothing will limit your performance on the technical side. The reverse polar patterns make it easy to adapt the mic to your application. Whatever positioning you choose, you will find the user interface fully accessible.READY TO GOShock mount and magnetic pop filterReduce unwanted structure-borne noise efficiently using the included shock mount. The magnetic filter hides nothing but captures everything but plosives and hisses. It perfectly integrates with the design of the microphone. Made In China

Read more less

Universal Audio Volt 276 USB C 2x2 Audio Interface Overview: Collaborate with Best-in-Class Audio QualityFrom the team that brought you the game-changing Apollo interface, Volt 276 delivers superior studio sound quality, with more character and tone than any USB interface in its class.Capture a Classic Vocal with Vintage Mic Preamp ModeFew sounds can compare to a vintage Universal Audio 610 tube preamp, as used to record everyone from Ray Charles to Van Halen. Volt 276 gives you the rich, full sound of this classic UA mic/line/instrument preamp, thanks to its built-in tube emulation circuitry, a UA exclusive.Control Volume Peaks with UA CompressionGet album-ready punch and presence with Volt 276's onboard 76 Compressor — an innovative analog circuit inspired by UA's classic 1176 Limiting Amplifier. The 76 Compressor features three perfectly tailored presets to tame voice, guitars, synths, and drum machines. Just plug in, pick a setting, and play.Easy In, Easy OutVolt 276 gives you simple 2-in/2-out audio connections. Just plug your mics, guitars, or synths into the front panel. Then connect your speakers or headphones to monitor your audio with no latency. With Volt, you’ll be creating like a pro, fast.Stay Inspired with a Curated Suite of Audio SoftwareSome audio interfaces give you a smattering of random audio apps. Not Volt. Instead, we put together a bundle of serious music production tools, virtual instruments, and plug‑ins from the industry's best. Included Software: Ableton Live Lite Softube Marshall Plexi Classic Amp Softube Time & Tone Bundle Celemony Melodyne Essential Relab LX480 Essentials Plugin Alliance Ampeg SVT-VR Classic Brainworx bx_tuner Brainworx bx_masterdesk Classic UJAM Virtual Drummer DEEP Virtual Bassist DANDY Spitfire LABS iPad & iPhone ReadyTraveling light? Plug Volt 276 into your iPad or iPhone, and you can easily create beats and samples, record your band’s rehearsals, and edit songs anywhere.*Capture Inspiration for Years to ComeFeaturing rugged metal construction, retro wood sides, and sleek industrial design, Volt 276 elevates your production space with impeccable style, built to last decades.Features Desktop 2-in/2-out USB 2.0 audio interface with class-leading 24-bit/192 kHz audio conversion for Mac, PC, iPad, and iPhone Vintage Mic Preamp mode for recording voice or guitar with the rich, full sound of a classic UA tube preamp Built-in 76 Compressor adds instant clarity and punch to voice, instruments, and other sources with all-new analog circuit based on UA's iconic 1176 Essential suite of audio and music software including Ableton, Melodyne, UJAM's Virtual Drummer, Marshall, Ampeg, and more Studio-quality headphone amplifier for loud, clear monitoring USB bus powered to reduce cable clutter 48V phantom power for condenser microphones Direct Monitoring for latency-free recording Stylish, rugged construction built to withstand years of use 1-in/1-out MIDI connections USB-C to USB-A cable included System Requirements Mac & PC Available USB 2.0 (or higher) port USB cable (included) Intel, AMD, or Apple Silicon processor (PC) Windows 10 64-bit edition (macOS) 10.14 Mojave or later Internet connection for software downloads iPad & iPhone iPadOS / iOS 14 or later *Requires external Volt power supply and an Apple Lightning to USB Camera Adapter (except iPads with USB-C). Frequently Asked Questions (FAQs): Q: Is the Volt 276 compatible with iPhones and iPads?A: Yes, the Volt 276 works with iPads and iPhones running iOS 14 or later. For iPads with USB-C, it connects directly. For iPhones and older iPads with Lightning ports, you’ll need an Apple Lightning to USB Camera Adapter and external power. Q: Does Volt 276 require external power?A: For iOS/iPadOS use, yes — an external power supply is required. When used with a Mac or PC via USB, it's bus-powered and doesn’t require external power. Q: What is the 76 Compressor feature?A: The built-in 76 Compressor is an analog circuit modeled after Universal Audio’s iconic 1176 Limiting Amplifier. It includes 3 presets (Vocal, Guitar, and Fast) for adding punch and clarity to your recordings. Q: What’s the difference between Volt 276 and Volt 2?A: The Volt 276 has all the features of the Volt 2, plus a built-in 76 Compressor and stylish retro wood side panels. Q: Can I connect MIDI instruments to Volt 276?A: Yes, the Volt 276 has standard 5-pin MIDI In and Out ports for connecting MIDI keyboards, controllers, or synths. Q: Is phantom power available for condenser mics?A: Yes, it has 48V phantom power, which you can activate to use condenser microphones. Q: Does it include any software or DAWs?A: Yes, the Volt 276 comes with a premium software bundle including Ableton Live Lite, Melodyne Essential, Softube amps and effects, and instruments from UJAM, Spitfire, and others. Q: What sample rate and bit depth does it support?A: The Volt 276 supports up to 24-bit / 192 kHz audio resolution for professional-grade recording and playback. Q: Is the Volt 276 good for beginners?A: Absolutely. It’s easy to set up and use, with features that benefit both beginners and experienced producers. Q: What operating systems is it compatible with?A: Volt 276 is compatible with Windows 10 (64-bit) or later, macOS 10.14 (Mojave) or later, and iPadOS/iOS 14 or later.

Read more less

Focusrite Scarlett 4i4 4th Gen Audio Interface  The original music maker's 4-in, 4-out interfaceScarlett 4i4 is the complete compact studio hub for all your instruments. Perfect for multi-instrumentalists and collaborators, 4i4 is loaded with I/O for everything. Two of our most detailed ultra-low-noise mic preamps. Hi-Z, line and MIDI connections for your keys, guitars, synths, grooveboxes and controllers. With 4i4 your headphones, monitors, and line outs each get their own mix, so you can match the studio setup to the session. Air mode, with Presence and Harmonic Drive, gives you that big console sound wherever you record. Auto Gain and Clip Safe make sure you'll never need to worry about your levels. And the Hitmaker Expansion software bundle includes all the tools you need to record, produce and release your tracks.     Two of our most detailed, ultra-low-noise preamps.Plug into 4i4’s 4th-Generation remote-controlled preamps – Scarlett’s clearest and most detailed ever, with a huge 69dB gain range to get the best from every mic.           Auto Gain and Clip Safe.Let 4i4 handle your levels.Auto Gain sets your levels and Clip Safe keeps them in the sweet spot, automatically tweaking the gain if you’re in danger of clipping. You'll never lose a take again.         All the software you need to make a hit record.Once you’ve got started with Ableton Live Lite or three months of Pro Tools Artist recording software (both included), the Hitmaker Expansion bundle has everything you need to bring big studio sound to your songs, with an unbeatable range of record-making studio tools from the biggest names in the business.     Get big console sound with two re-engineered Air modes.Presence mode boosts your signal’s high-end, bringing the sound to the front of the mix. Create intimate vocal recordings, capture every detail of acoustic guitars, and hear your drum overheads shimmer. Harmonic Drive mode boosts mid-range harmonics in your sound, making its unique character shine through the mix. Try it on guitars, vocals, or anything else that needs a little more punch.       All the software you need to make a hit record.Once you've got started with Ableton Live Lite, three months of Pro Tools Artist, or six months of FL Studio Producer Edition recording software (all included), the Hitmaker Expansion bundle has everything you need to bring big studio sound to your songs, with an unbeatable range of record-making studio tools from the biggest names in the business.       Mix your way with 4i4’s independent outputs.With 4i4, headphones, monitors, and line outs each get their own mix, so you can create the perfect studio setup for your speakers, the artist's headphones, and your outboard gear.       Huge 120dB dynamic range for incredible recordings.Scarlett delivers incredible audio quality, with converters direct from our flagship RedNet interfaces — as found in high-end studios around the world.             The best playback you’ve ever heard.A custom-designed headphone amp design sets the stage for the best playback you've ever heard from a Scarlett interface, driving high-impedance headphones louder and clearer than ever before.           Easy StartNeed help getting set up? Just tell our Easy Start tool what you want to do and we’ll guide you through all the software and setup you need, with recording tips and other helpful content along the way.       Three-year warrantyMillions of musicians rely on Scarlett every day, and we make some of the more dependable interfaces in the business. However, should the unexpected happen, every Focusrite interface comes with three-year warranty – just in case.Specifications:Overview Number of Microphone Preamps: 2 Phantom Power: Yes Instrument Inputs: 2 Line Inputs: 4 Air Mode: Yes Auto Gain: Yes Clip Safe: Yes Line Outputs: 4 Headphone Outputs: 1 Loopback: Yes MIDI: Yes Connectivity: USB Type-C Protocol: USB 2.0 Form Factor: Desktop Simultaneous I/O: 6 x 6 (including Loopback inputs) A/D Resolution: 24-bit/192 kHz Bus Powered: Yes (1.5A) Supported sample rates: 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz Microphone inputs Frequency Response: 20-20kHz ± 0.06dB Dynamic Range: 116dB (A-Weighted) THD+N: -100dB @ 8dB gain Noise EIN: -127dBu (A-Weighted) Maximum Input Level: 16dBu Gain Range: 69dB Impedance: 3kΩ Variable Line inputs Frequency Response: 20-20kHz ± 0.05dB Dynamic Range: 115.5dB (A-Weighted) THD+N: -100dB @ 8dB gain Maximum Input Level: 22dBu Gain Range: 69dB Impedance: 60kΩ Fixed Line inputs Frequency Response: 20-20kHz ± 0.02dB Dynamic Range: 115.5dB (A-Weighted) THD+N: -105dB Maximum Input Level: 22dBu Impedance: 60kΩ Instrument inputs Frequency Response: 20-20kHz ± 0.15dB Dynamic Range: 113dB (A-Weighted) THD+N: -80dB @ minimum gain Maximum Input Level: 12dBu Gain Range: 62dB Impedance: 1MΩ Line outputs (Balanced) Frequency Response: 20-20kHz ± 0.02dB Dynamic Range: 120dB THD+N: -112dB Maximum Output Level: 16dBu Impedance: 100Ω Headphone outputs Frequency Response: 20-20kHz ± 0.1dB @ 33Ω / 300Ω Dynamic Range : 112dB @ 33Ω / 115dB @ 300Ω THD+N: -99dB @ 33Ω / -108dB @ 300Ω Maximum Output Level: 5dBu into 33Ω / 11dBu into 300Ω Maximum Output Power: 57mW into 33Ω / 27mW into 300Ω Impedance: 11Ω Analogue to Digital Converter THD+N: -110dB Dynamic Range: 120dB Digital to Analogue Converter THD+N: -115dB Dynamic Range: 130dB (A-Weighted) Power USB: 1.5A External (Optional): 7.5W What’s In The Box Scarlett 4i4 4th Gen. USB C-C Cable USB C-A Adaptor USB-C 5V 3A Power supply

Read more less

Audient iD14 MKII – 10 In / 6 Out High-Performance USB-C Audio Interface Overview The Audient iD14 MKII is a high-performance USB-C audio interface built for musicians, producers, and content creators seeking studio-quality sound in a compact format. It features class-leading mic preamps, ultra-low latency performance, ADAT expandability, and advanced monitor controls. Key Features Audient Console Mic Preamps Derived from the renowned ASP8024-HE recording console, iD14’s mic preamps deliver ultra-low noise, low distortion, and a touch of analog warmth. Class-Leading Converters 121dB dynamic range converters ensure every detail of your recording is captured, providing clarity and depth during tracking and mixing. Four Line Outputs Connect to two sets of monitors or route audio externally for additional processing or headphone distribution. Dual Headphone Outputs Drive headphones up to 600 Ohms with both 1/4" and 1/8" headphone jacks for versatile monitoring options. ADAT Expansion Expand your I/O with up to eight additional mic preamp channels via ADAT — ideal for growing studios. JFET Instrument Input Designed to emulate the input stage of a classic tube amplifier, perfect for guitar and bass recording. iD Mixer Software Create low-latency cue mixes, control monitors, and manage inputs with ease using the intuitive software mixer. Talkback Functionality Use any audio device connected to your computer (including built-in or USB microphones) for talkback communication, keeping your mic inputs free. Monitor Control and ScrollControl Assign key monitoring functions to the iD button (DIM, CUT, Mono, Talkback, etc.) and use ScrollControl to control DAW parameters with the hardware knob. USB-C Bus Powered No external power supply needed — the interface is fully powered via USB-C. True +48V Phantom Power Delivering stable phantom power over USB ensures your condenser microphones perform at their best. All-Metal Chassis Rugged and portable, the all-metal build makes the iD14 MKII suitable for studio and mobile setups. Included Software Bundle Comes with Cubase LE and additional creative plugins and instruments to get you started immediately. Technical Specifications Mic Gain: 58dB Mic Pre EIN: 128dB A-Weighted Mic Pre SNR: 100dB A-Weighted Mic Pre THD+N: <0.002% Frequency Response (Unity Gain): ±0.5dB 10Hz – 40kHz ADC Dynamic Range: 121dB ADC THD+N: <0.001% Line Output Dynamic Range: 126dB A-Weighted Line Output THD+N: 0.0005% Headphone Amp Output: 30 Ohm Load: 220mW 62 Ohm Load: 280mW 600 Ohm Load: 100mW Power Requirements: USB 3.0 (900mA at 5V) or USB-C (1.5A at 5V) Included Cable: USB Type-C to Type-C (1m) Made in China Who Should Buy the Audient iD14 MKII? Home & Professional Studio Owners – Compact yet powerful interface for high-quality recordings. Singer-Songwriters & Musicians – Record vocals, guitars, and instruments with clarity and precision. Producers & Mixing Engineers – Transparent audio quality and detailed monitoring for critical work. Podcasters & Content Creators – Clean input path and dual headphone outs for interviews and streaming. Live Streamers – Reliable performance with loopback and real-time monitoring. Audient iD14 MKII vs Other Interfaces Feature Audient iD14 MKII Focusrite Scarlett 2i2 Universal Audio Volt 2 Preamps 2x Audient Console Mic Preamps 2x Scarlett Preamps 2x Vintage UA Preamps Audio Quality 24-bit / 96kHz 24-bit / 192kHz 24-bit / 192kHz Instrument Input JFET DI Input Standard DI Vintage Mode Expandability ADAT (Up to 10 Inputs) Not Available Not Available USB Connection USB-C (Bus Powered) USB-C USB-C Headphone Outputs Dual Outputs Single Output Single Output Order Now Experience professional-grade recording and mixing with the Audient iD14 MKII. Order online and get fast delivery across India.

Read more less

Yamaha MG16XU 16-Channel Mixing Console The Yamaha MG16XU is a 16-channel analog mixing console designed for professionals who demand superior sound quality, reliability, and versatility. Whether you are mixing a live performance, recording in the studio, or streaming audio, this mixer offers high-end features and intuitive operation. Equipped with Yamaha’s renowned D-PRE mic preamps, 1-knob compressors, built-in SPX digital effects, and USB audio connectivity, the MG16XU is a powerful solution for musicians, sound engineers, and content creators. Key Features: 🎛️ 16-Channel Mixer – Ideal for bands, DJs, small venues, and professional studios. 🎤 10 D-PRE Mic Preamps – Class-A preamps with natural, transparent sound and low noise. 🎚️ 3-Band EQ & High-Pass Filters – Fine-tune your sound with precise frequency control. 🔊 1-Knob Compressors – Easily control dynamics for vocals, guitars, and drums. 🎶 SPX Digital Effects Processor – 24 high-quality effects including reverb, delay, chorus, and flanger. 💻 Built-in USB Audio Interface – Record and stream directly to your PC, Mac, or iOS device. 🔄 Flexible Routing Options – 4 group buses, 2 aux sends, and a stereo bus for advanced mixing. 🔌 Multiple Inputs/Outputs – XLR, TRS, RCA, and USB connections for easy integration with any setup. 🔋 Durable Metal Chassis – Rugged design for long-lasting performance on the road or in the studio. Perfect for Various Applications Live Sound Mixing – Ideal for bands, DJs, corporate events, and churches. Studio Recording – Works seamlessly with Cubase AI DAW software for professional music production. Broadcasting & Streaming – High-resolution USB audio interface ensures crystal-clear online content creation. Seamless Digital Integration Plug & Play USB Connectivity – Record and playback high-resolution 24-bit/192kHz audio directly to your computer. DAW Compatibility – Works seamlessly with Cubase, Ableton, Logic Pro, and other recording software. Additional Features Max. 10 Mic / 16 Line Inputs (8 mono + 4 stereo) 4 Group Buses + 1 Stereo Bus 4 AUX Sends (including FX) 1-Knob Compressors for Dynamic Control High-grade SPX Effects with 24 Programs 24-bit/192kHz 2in/2out USB Audio Functions iPad Compatibility through Apple iPad Camera Connection Kit / Lightning to USB Camera Adapter Cubase AI DAW Software Included (Download Version) PAD Switch on Mono Inputs +48V Phantom Power XLR Balanced Outputs Internal Universal Power Supply Metal Chassis for Durability Rack Mount Kit Included Specifications Dimensions: 444 mm x 130 mm x 500 mm (17.5" x 5.1" x 19.7") Weight: 6.8 kg (15.0 lbs.)

Read more less